From: Martin, Josh [Josh.Martin@Blastrac.com]
Sent: Tuesday, March 22, 2011 12:08 PM
To: John Pinizzotto
Subject: RE: Needed
Here is a BOM for electric
control panel (P000338):
001-
P000347
1.000
ENCLOSURE/CONTROL
PANEL - 1-10DE9
002-
7170530
9.000
TERMINAL-BLOCK/BLACK
RK2.5-5-5 (B
003-
7170510
4.000
TERMINAL-BLOCK/RED
RL2.5-4 (RED
004- 7170520
1.000
TERMINAL-BLOCK/WHITE
RK2.5-4 (WH
005-
7170480
1.000
END-PLATE/TERMINAL
006-
7170490
1.000
ISOLATION-PARTITION/TERMINAL
007-
7170450
2.000
END-STOP/TERMINAL
35MM
008-
P000161
1.000
DIN
RAIL/
35MM
009-
P000145
1.000
GASKET/HOUR
METER
010-
P000144
1.000
HOUR
METER/ 120V 50/60HZ
011-
P000400
1.000
PLUG/CORD
END - IEC MALE 30AMP 3P
012-
P000402
1.000
PLUG/CORD
END - FEMALE 30AMP 3P+G
013-
P000398
1.000
PLUG/PANEL
MOUNT - MALE 30 AMP 3P+
014-
P000405
1.000
COVER-CAP/PLUG
015-
P000393
1.000
LAMP/REPLACEMENT
- T3, 1/4, 120V
016-
P000196
1.000
TRANSFORMER/CTRL
240/480V PRIMARY
017-
P000147
2.000
TERMINAL-COVER/TRANSFORMER
018-
P000164
1.000
CONNECTOR
HOOD W/PINS - TOP ENTRY
019-
P000165
1.000
CONNECTOR
HOOD/ CABLE TO CABLE
020-
P000166
1.000
CONNECTOR/MALE
INSERT
021-
P000167
1.000
CONNECTOR/FEMALE
INSERT
022-
P000160
1.000
RESISTOR/DC
DRIVE 1/4HP
023-
P000159
1.000
DC
DRIVE W/ 5K POT W/INTERNAL
024-
P000168
1.000
SWITCH/LIMIT
025-
7168140
1.000
CIRCUIT-BREAKER/CPT
SECONDARY 6.0AM
026-
P000171
1.000
CONTACT/AUXILARY
(1 NO/1 NC) FOR EA
027-
P000205
1.000
CONTACTOR/MPS/
24-32AMP
028-
P000207
1.000
MTR-CKT-PRTCTR/
0.25-0.4AMP
029-
7168240
1.000
MTR-CKT-PRTCTR/
2.4-4.0AMP
030-
P000155
1.000
SWITCH/PUSH
BUTTON - DUAL FOR
031-
P000150
1.000
PILOT-LIGHT/GREEN
125V PUSH-TO-TE
032-
P000151
1.000
PILOT
LIGHT/RED 125V PUSH-TO-TEST
033-
P000212
1.000
SWITCH/E-STOP
LATCHING - PULL TO
034-
P000174
1.000
SWITCH/MAIN
DISCONNECT W/HANDLE 6
035-
P000351
1.000
TRANSFORMER/AC
50:5 RATIO W/ 24"
036-
6919490
2.000
STRAIN-RELIEF/CABLE
- DOUBLE EYE
037-
P000180
2.000
CORD-GRIP/
0.20"-0.35" 11PG
038-
P000181
1.000
CORD-GRIP/
0.20"-0.35" 13.5PG
039-
6919250
3.000
FITTING/LIQUID
TIGHT STRAIN RELIEF
040-
P000221
1.000
RELAY/PHASE
SEQUENCE/LOSS SELF POWE
041-
P000315
1.000
SOCKET/RELAY
- PHASE SEQUENCE MONIT
042-
P000392
1.000
KNOB/POTENTIOMETER
- SCALED 1-10
043-
4901980
1.000
CABLE/ELEC
4COND #8AWG TYPE W
044-
P000423
1.000
CORD-GRIP/
0.75" X 3/4"NPT
045-
P000175
2.000
CONNECTOR/SEALTITE
3/4" X 90DEG
046-
P000335
4.000
WIRE/SHIELDED
18/3 300V 20FT. LG
047-
P000430
2.000
WIRE/SHIELDED
18/4 300V 6 FT. LG
048- P000336
2.000
SWITCH/PUSH
BUTTON
049-
P000329
2.000
LINK/QUICK
5/16" SPRING CLIP CLOS
050-
P000349
2.000
CONNECTOR/MALE
4-POLE 300V
051-
P000350
2.000
CONNECTOR/FEMALE
4-POLE 300V
052-
P000428
1.000
AMMETER/
0-50AMP TRANSFORMER RATE
053-
P000177
1.000
CONDUIT/SEALTITE
3/4" FLEXIBLE
054-
6871220
1.000
POTENTIOMETER/SPEED
TAV
055-
P000719
1.000
DOOR/ENCLOSURE
L.H. - 1-10DE99
056-
P000720
1.000
DOOR/ENCLOSURE
R.H. - 1-10DE99
057- P000721
1.000
INSTRUCTION
LEGEND PLATE - 1-10DE99
Thanks,
Josh Martin
From: John Pinizzotto [mailto:jpinizzotto@aramsco.com]
Sent: Tuesday, March 22, 2011 10:59 AM
To: Martin, Josh
Subject: RE: Needed
I don’t have an Electrical BOM
for that machine, do you? I am looking for the Ammeter on the
Blasthead.
John Pinizzotto| Customer Service Rep
Aramsco,
Inc.
1480 Grandview Ave | Paulsboro, NJ 08066
P: 856 686 7700 x7957
F: 800 767 2670
jpinizzotto@aramsco.com
| www.aramsco.com
From: Martin, Josh [mailto:Josh.Martin@Blastrac.com]
Sent: Tuesday, March 22, 2011 11:56 AM
To: John Pinizzotto
Subject: RE: Needed
What up bro.
It’s a 1-10DE99
Thanks,
Josh Martin
From: John Pinizzotto [mailto:jpinizzotto@aramsco.com]
Sent: Tuesday, March 22, 2011 10:53 AM
To: Martin, Josh
Subject: FW: Needed
Hey man, can you put that serial
number below in your system and let me know if that is a 1-10DE or just a
1-10D?
John Pinizzotto| Customer Service Rep
Aramsco,
Inc.
1480 Grandview Ave | Paulsboro, NJ 08066
P: 856 686 7700 x7957
F: 800 767 2670
jpinizzotto@aramsco.com
| www.aramsco.com
From: Keith Chesnut [mailto:KCHESNUT@fromkinbrothers.com]
Sent: Tuesday, March 22, 2011 11:29 AM
To: John Pinizzotto
Subject: RE: Needed
The 10” machine is #23100030
1-10-DE
Keith Chesnut
Purchasing
FROMKIN BROTHERS, INC.
Fax 732-512-0614
From: John Pinizzotto [mailto:jpinizzotto@aramsco.com]
Sent: Monday, March 21, 2011 5:25 PM
To: Keith Chesnut
Subject: Re: Needed
I need the serial number off
each machine to make sure you get the right one, is that possible?
From: Keith Chesnut [mailto:KCHESNUT@fromkinbrothers.com]
Sent: Monday, March 21, 2011 05:16 PM
To: John Pinizzotto
Subject: Needed
I need new AMPERES meters for both the 15” machine and the 10D” machine.
I need a set of X plugs for the Prepmaster machine.
Thanks,
Keith Chesnut
Purchasing
FROMKIN BROTHERS, INC.
Fax 732-512-0614
John Pinizzotto| Customer Service Rep
Aramsco,
Inc.
1480 Grandview Ave | Paulsboro, NJ 08066
P: 856 686 7700 x7957
F: 800 767 2670
jpinizzotto@aramsco.com
| www.aramsco.com
The
information transmitted is intended only for the person or entity to which it
is addressed and may contain confidential or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any action in
reliance upon, this information by persons or entities other than the intended
recipient is prohibited. If you received this in error, please notify the
sender and delete the material from your computer.